Intercepts extracted and reviewed by Strikepoint from the issuer’s filings. True widths may differ from downhole widths; see the full release for drill orientation.
Froyo Zone Keeps Growing: Founders Metals Hits 54.0 m of 8.45 g/t Gold
Vancouver, British Columbia--(Newsfile Corp. - October 7, 2026) - Founders Metals Inc. (TSXV: FDR) (OTCQX: FDMIF) (FSE: 9DL0) ("Founders" or the "Company") announces assay results from Upper Antino-Froyo Zone (the "Froyo Zone") drilling at its Antino Gold Project ("Antino" or the "Project") in southeastern Suriname (Figure 1). Drill hole FR256 returned 54.0 metres (m) of 8.45 grams per tonne (g/t) gold (Au) from 303.0 m, including 24.0 m of 17.42 g/t Au, on a parallel structure approximately 100 m east of the high-grade zone intersected in FR249 (28.0 m of 14.27 g/t Au, announced August 6, 2026) (Figure 2).
Colin Padget, President & CEO, commented, "FR256 returned 54.0 metres of 8.45 g/t gold from a second, parallel structure 100 metres east of FR249, where we hit 28.0 metres of 14.27 g/t gold in August. Lower in the same hole, FR256 also extended the FR249 zone down-dip. These results reinforce the scale and high-grade potential of the gold system at Upper Antino. Our drilling continues to identify new structures and extend known zones at depth, and the system remains open. We look forward to further defining its extent through our ongoing step-out program for the balance of 2026."
Highlights
Second, parallel high-grade structure: 54.0 m of 8.45 g/t Au from 303.0 m (~275 m vertical), including 24.0 m of 17.42 g/t Au (FR256), approximately 100 m across strike to the east of the previously released 28.0 m of 14.27 g/t Au (FR249; Figure 2)
FR249 zone extended approximately 75 m down-dip: 11.0 m of 3.59 g/t Au from 464.0 m (~420 m vertical) (FR256; Figure 3)
Gold mineralization near surface: 16.5 m of 4.21 g/t Au from 30.6 m (FR264; Figure 3)
Drilling ongoing: 16 holes totalling 5,809 m are reported in this release, and step-out drilling on both structures is planned for the remainder of 2026
Drilling at Upper Antino continues to step out along and across strike, testing for parallel structures and the down-dip extent of the gold-bearing shear zones that define the target. FR256 intersected 54.0 m of 8.45 g/t Au from 303.0 m within a second, parallel structure approximately 100 m across strike to the east of the previously reported 28.0 m of 14.27 g/t Au in FR249. Deeper in the same hole, FR256 returned 11.0 m of 3.59 g/t Au from 464.0 m, extending the FR249 zone approximately 75 m down-dip. As elsewhere at the Froyo Zone, the gold is hosted in steeply dipping, northwest-trending shears and is associated with quartz-carbonate veining, pervasive sericite alteration and pyrite plus pyrrhotite. FR252, drilled from the same pad as FR256, intersected multiple gold-bearing shears, returning 4.0 m of 10.22 g/t Au from 291.0 m, 14.0 m of 1.41 g/t Au from 319.0 m and 14.0 m of 4.22 g/t Au from 401.0 m.
Copyright (c) 2026 QuoteMedia, Inc.
Founders Metals hits 54.0 m of 8.45 g/t Au at Froyo Zone | Strikepoint News
Shallow drilling has also intersected mineralization up-dip within the oxide profile: FR264 returned 16.5 m of 4.21 g/t Au from 30.6 m (Figure 3). The Froyo Zone remains open along strike and at depth, and the Company will complete follow-up drilling over the remainder of 2026.
Stock Options and RSU Grant The Company also announces that, pursuant to its Omnibus Long-Term Incentive Plan (the "Omnibus Plan"), it has granted a total of 115,000 stock options ("Options") and 74,725 restricted share units ("RSUs") to officers and employees of the Company. The Options are exercisable at a price of C$8.20 per share and expire five years from the date of grant. The Options and 43,375 of the RSUs vest over a period of three years, with one-third vesting on each of the first, second, and third anniversaries from the date of grant. The remaining 31,350 RSUs vest on the first anniversary of the date of grant.
About Founders Metals Inc. Founders Metals Inc. is a Canadian gold exploration company building a district-scale gold camp in southeastern Suriname. The Company owns a 100% royalty-free interest in the Antino Gold Project, a 102,360-hectare contiguous land package representing the largest uninterrupted package of highly prospective greenstone belt geology in the Guiana Shield. Founders is executing one of the most active exploration programs in the global junior gold sector and is backed by a strategic investment from Gold Fields Limited. The Company is committed to responsible exploration, strong community engagement, and disciplined capital allocation as it advances Suriname's next major gold camp.
1 Results shown in Figure 1 were previously disclosed by the Company in news releases dated August 24, 2023; July 22, 2024; September 24, 2024; November 7, 2024; December 11, 2024; February 20, 2025; April 23, 2025; June 23, 2025; June 24, 2025; December 11, 2025; January 22, 2026; April 2, 2026; April 30, 2026; June 23, 2026; July 15, 2026; August 6, 2026; and September 9, 2026, each available on the Company's website and under its profile at www.sedarplus.ca.
2 Results shown in Figure 2 were previously disclosed by the Company in news releases dated December 7, 2023; December 21, 2023; July 22, 2024; August 6, 2026; and September 9, 2026, each available on the Company's website and under its profile at www.sedarplus.ca.
3 Results shown in Figure 3 were previously disclosed by the Company in news releases dated November 30, 2023; December 21, 2023; June 27, 2024; and August 6, 2026, each available on the Company's website and under its profile at www.sedarplus.ca.
Table 1: Upper Antino-Froyo Zone Assay Results
Drillhole
From (m)
To (m)
Interval (m)
Au (g/t)
FR271
0.00
17.10
17.10
0.32
and
91.00
93.00
2.00
3.21
and
134.00
144.00
10.00
0.67
and
264.00
267.00
3.00
1.47
FR270
NSA
FR269
346.00
372.00
26.00
0.64
incl.
355.00
361.00
6.00
1.79
and
396.00
405.00
9.00
0.94
FR268
NSA
FR265
36.60
46.00
9.40
1.53
FR264
30.60
47.10
16.50
4.21
FR262
32.10
45.60
13.50
0.97
FR261
44.10
51.60
7.50
0.77
and
324.00
332.00
8.00
0.47
and
354.00
361.00
7.00
0.55
and
366.00
376.00
10.00
0.93
and
428.00
434.00
6.00
0.81
and
462.00
473.00
11.00
0.53
FR258
0.00
9.60
9.60
0.55
and
122.00
134.00
12.00
1.36
and
322.00
332.00
10.00
0.48
FR256
303.00
357.00
54.00
8.45
incl.
324.00
348.00
24.00
17.42
and
464.00
475.00
11.00
3.59
and
697.00
702.00
5.00
0.78
FR255
128.00
134.00
6.00
0.57
and
181.00
192.00
11.00
0.50
FR252
44.10
54.60
10.50
0.80
and
291.00
295.00
4.00
10.22
and
319.00
333.00
14.00
1.41
and
401.00
415.00
14.00
4.22
and
421.00
430.00
9.00
2.43
FR244
0.00
21.60
21.60
0.58
incl.
11.10
17.10
6.00
1.50
and
96.00
100.00
4.00
1.02
FR237
0.00
6.60
6.60
0.58
and
15.60
26.10
10.50
0.50
and
32.10
44.10
12.00
0.53
and
72.60
76.00
3.40
1.21
and
103.00
114.00
11.00
0.84
and
192.00
202.00
10.00
0.31
FR235
NSA
FR233
38.10
47.00
8.90
0.83
and
346.00
352.00
6.00
0.53
Intervals are down-hole core lengths. True widths of mineralization are estimated to be approximately 75% of the down-hole interval based on currently available results and observations. All are diamond drill holes. Interval average grades are calculated with uncapped gold assays, as insufficient drilling has been completed to determine capping levels for higher-grade gold intercepts. Widths are calculated using a 0.10 g/t gold cut-off grade with <5.0 m of internal dilution of zero grade material, and a minimum composite length of 2.0 m. Intervals below 3.0 gram-metres are omitted. NSA means No Significant Assays.
Table 2: Upper Antino-Froyo Zone Drill Hole Locations
Hole ID
Easting (m)
Northing (m)
Elevation (m)
Azimuth (°)
Dip (°)
Depth (m)
FR271
817133.60
401298.20
191.27
249.99
-50.23
339.50
FR270
816643.33
402463.00
187.74
260.00
-50.21
254.00
FR269
816784.50
401904.50
175.41
80.05
-54.98
413.00
FR268
816730.00
402473.00
201.16
260.13
-50.42
200.00
FR265
816916.50
401088.00
170.76
240.04
-50.29
110.00
FR264
816940.50
401043.00
168.65
240.09
-50.25
101.00
FR262
816925.50
401067.00
166.12
240.15
-50.35
101.00
FR261
817448.00
400915.00
199.00
240.12
-60.31
599.00
FR258
817438.00
400824.00
204.61
240.00
-70.19
386.10
FR256
817358.67
401106.00
168.57
260.00
-65.00
761.00
FR255
817480.67
400751.58
214.81
240.21
-55.10
260.01
FR252
817358.59
401105.90
168.57
260.25
-55.35
595.91
FR244
817203.33
400976.00
155.00
245.00
-55.00
401.00
FR237
817248.33
400940.33
169.44
240.00
-65.00
392.05
FR235
816655.33
400879.00
226.38
270.00
-50.00
290.00
FR233
817233.33
401230.67
150.10
250.00
-60.00
605.00
Coordinates are reported in WGS 84 / UTM Zone 21N.
ON BEHALF OF THE BOARD OF DIRECTORS,
Per: "Colin Padget"
Colin Padget President, Chief Executive Officer, and Director
Quality Assurance and Control Samples were analyzed at FILAB Suriname, a Bureau Veritas Certified Laboratory in Paramaribo, Suriname (a commercial certified laboratory under ISO 9001:2015). Samples are crushed to 75% passing 2.35 mm screen, riffle split (700 g) and pulverized to 85% passing 88 µm. Samples were analyzed using a 50 g fire assay (50 g aliquot) with an Atomic Absorption (AA) finish. For samples that return assay values over 10.0 grams per tonne (g/t), another cut was taken from the original pulp and fire assayed with a gravimetric finish. Founders Metals inserts blanks and certified reference standards in the sample sequence for quality control. External QA/QC checks are performed at ALS Global Laboratories (Geochemistry Division) in Lima, Peru (an ISO/IEC 17025:2017 accredited facility). A secure chain of custody is maintained in transporting and storing of all samples. Drill intervals with visible gold are assayed using metallic screening. Diamond drill core is HQ diameter through oxide intervals and predominantly NQ diameter in deeper drilling. All samples are half core, split using a diamond saw.
Qualified Persons The technical content of this news release has been reviewed and approved by Michael Dufresne, M.Sc., P.Geol., P.Geo., an independent qualified person as defined by National Instrument 43-101.
Cautionary Statement Regarding Forward-Looking Information This news release contains "forward-looking information" within the meaning of applicable Canadian securities legislation, including statements regarding true-width estimates, the interpretation of drill hole FR256 intersecting a parallel structure, mineralization remaining open and the potential for further mineralization expansion, planned follow-up drilling, the grant of Options and vesting and exercise thereof, long-term value creation and the Company's prospects. Forward-looking information can generally be identified by words such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", "believes", or variations indicating that certain actions, events or results "may", "could", "would", "might" or "will" occur or be achieved.
Forward-looking statements are based on management's current expectations and reasonable assumptions but are subject to business, market, and economic risks, uncertainties, and contingencies that may cause actual results to differ materially from those expressed or implied, including: general business and economic uncertainties; exploration results; the risk that additional drilling does not confirm the geological interpretation described herein; mining industry risks; and other factors described in the Company's most recent annual management discussion and analysis. Although the Company has attempted to identify important factors that could cause actual results to differ materially, other factors may cause results not to be as anticipated. There can be no assurance that forward-looking information will prove accurate, as actual results and future events could differ materially from those anticipated. Accordingly, readers should not place undue reliance on forward-looking information. The Company does not undertake to update any forward-looking information except in accordance with applicable securities laws. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
All material information on Founders Metals can be found at www.sedarplus.ca.
